Biomiga

HP Plasmid Maxi Kit, 25 Preps, Biomiga


 

$380.00

Biomiga
PD1713-02
In stock
+

Key to the kit is our proprietary DNA binding systems that allow the high efficient binding of DNA to our ezBindTM matrix while proteins and other impurities are removed by Wash Buffer. Nucleic acids are easily eluted with sterile water or Elution Buffer.

Unlike other kits in the markets, our patented plasmid purification kit has no chaotropic salts in the buffer, the purified DNA is guanidine/anion exchange resin residues free which enable the high performance of downstream applications such as transfection, restriction mapping, library screening, sequencing, as well as gene therapy and genetic vaccinations.

Important Notes

Copy numbers : The yield of plasmid DNA depends on the origin of the replication and the size of the plasmid. The protocols are optimized for high copy number plasmid purification. For low copy number plasmids, both the culture volume and the buffer volume need to be scaled up 2 to 3 times. Reference the table below for the commonly used plasmids,

Plasmid

Origin

Copy Numbers

Expected Yield(µg per 200 mL)

pSC101

pSC101

5

12

pACYC

P15A

10-12

25-40

pSuperCos

pMB1

10-20

30-50

pBR322

pMB1

15-20

35-50

pGEMR

Muted pMB1

300-400

350-450

pBluescriptR

ColE1

300-500

450-600

pUC

Muted pMB1

500-700

700-1,000

Host Strains: The strains used for propagating plasmid have significant influence on yield. Host strains such as JM101, JM110, HB101, TG1 and their derivatives, normally have low plasmid yield due to either endogenous endonucleases or high carbohydrates released during lysis. We recommend transform plasmid to an endA- strain if the yield is not satisfactory. For purifying plasmid DNA from endA- strain such as Top 10, DH5a, and C600, we recommend use product number PD1511.

Optimal Cell Mass (OD600 x mL of Culture): This procedure is designed for isolating plasmid grown in standard LB medium (Luria Bertani) for 12 -16 hours to a density of OD600 2.0 to 3.0. If rich medium such as TB or 2xYT are used, make sure the cell density doesn't exceed 3.0 (OD600). A high ratio of biomass over lysis buffers result in low DNA yield and purity. The maxi column has an optimal biomass of 450-550. For example, if the OD600 is 2.5, the optimal culture volume should be 200 mL.

Culture Volume : Use a flask or tube with a volume at 4 times the culture medium to secure optimal condition for bacteria growth. Don't exceed the maximum culture volume suggested in the protocol. Incomplete lysis due to over amount of bacterial culture results in lower yield and less purity.

Storage and Stability

Buffer A1 should be stored at 4? once RNase A is added. All other materials can be stored at room temperature. The Guaranteed shelf life is 18 months from the date of purchase.

Before Starting

Prepare all components and get all necessary materials ready by examining this instruction booklet and become familiar with each step.

Important

  • RNase A: Spin down the RNase A vial briefly. Add the RNase A solution to Buffer A1 and mix well before use. Store at 4?.
  • Buffer B1 precipitates below room temperature, it is critical to warm up the buffer at 37 ? to dissolve the precipitates before use.
  • Buffer C1 may form precipitates below 10?, warm up at 37? to dissolve the precipitates before use.
  • Keep the cap tightly closed for Buffer B1 after use.
  • Make sure the availability of centrifuge and vacuum manifold, especially, after mixing the lysate with ethanol, the sample needs to be processed immediately either by centrifugation or vacuum.
  • Add 84 mL(PD1713-01) or 190mL(PD1713-02)100 % ethanol into corresponding DNA Wash Buffer?
  • Carry out all centrifugations at room temperature.

Materials supplied by users

  • 70% ethanol and 100% ethanol.
  • High speed centrifuge
  • 50 mL high speed centrifuge tubes
  • 50 mL tubes

Kit Contents

Catalog #

PD1713-01

PD1713-02

Preps

10

25

ezBindTMColumns

10

25

Buffer A1

110 mL

270 mL

Buffer B1

110 mL

270 mL

Buffer C1

135 mL

330 mL

EndoClean Buffer

5 mL(Optional: For Endofree)

10 mL(Optional: For Endofree)

Buffer KB

120 mL

270 mL

DNA Wash Buffer

36 mL

80 mL

RNase A

11 mg

27 mg

Elution Buffer

30 mL

60 mL

EndoFree Water

4 mL(Optional: For Endofree)

10 mL(Optional: For Endofree)

None