BM-10 Bench Top Vibration Isolation Platform, minusK

The BM-10 bench top platform offers 10-100 times better performance than a full size air table in a package only 4.6 inches tall and 12 inches wide and deep.  It also does this without any air or electricity!

This vibration isolation platform is extremely easy to use and offers extreme performance. It offers a 1.5Hz horizontal natural frequency and our signature 0.5 Hz vertical natural frequency.  There are only two adjustments.  The BM-10 is perfect for new generations of small SPM's that require the highest performance in a very compact system.

This is the thinnest, smallest footprint, most portable, and most user-friendly isolator ever offered that is capable of delivering this level of performance.They can also be made cleanroom and vacuum capatible.

The curve below shows the vertical 1/2 Hz performance of the BM-10. It offers 10-100 times better performance than an air table in a package many times smaller. The horizontal isolation performance of the BM-10 is the same as that of the BM-6.

Transmissibility Curves

Weight: Approximately 35 lb (16 kg)
Dimensions: 12.2” W x 12.2” D x 4.6” H
(310mm W x 310mm D x 117mm H)
Approximate payload weight range:


Payload Range*



0 - 10 lb (0 - 4.5 kg)



10 - 30 lb (4.5 - 14 kg)



30 - 55 lb (14 - 25 kg)



50 - 80 lb (22.5 -36 kg)



75 - 110 lb (34 - 50 kg)


  • Horizontal frequencies are weight dependent.
  • Horizontal frequency of 1.5 Hz is achieved at the upper limit of the payload range.
  • At the lower limits of the payload range the horizontal frequency is approximately 2.5 Hz.
  • Vertical frequency is tunable to 0.5 Hz throughout the payload range.
Simple Set-Up and Adjustment